ad336c2cfc ioscan -P health -C fcClass I H/W Path Driver S/W State H/W Type Description =============================================================================== disk 7 0/0/2/1.0.16 UsbScsiAdaptor CLAIMED DEVICE USB SCSI Stack Adaptor /dev/deviceFileSystem/Usb/MassStorage/dsk/diskhp-1008 294=A60020000001 /dev/deviceFileSystem/Usb/MassStorage/rdsk/diskhp-1008 294=A60020000001 disk 3 0/4/1/0.0.0.0.0 sdisk CLAIMED DEVICE HP DG0146FAMWL /dev/dsk/c2t0d0 /dev/dsk/c2t0d0s2 /dev/rdsk/c2t0d0 /dev/rdsk/c2t0d0s2 /dev/dsk/c2t0d0s1 /dev/dsk/c2t0d0s3 /dev/rdsk/c2t0d0s1 /dev/rdsk/c2t0d0s3 disk 2 0/4/1/0.0.0.1.0 sdisk CLAIMED DEVICE HP DG0146FAMWL /dev/dsk/c2t1d0 /dev/dsk/c2t1d0s2 /dev/rdsk/c2t1d0 /dev/rdsk/c2t1d0s2 /dev/dsk/c2t1d0s1 /dev/dsk/c2t1d0s3 /dev/rdsk/c2t1d0s1 /dev/rdsk/c2t1d0s3Counting the core id would give a clear indication of the number of actual cores on the processor $ cat /proc/cpuinfo grep -i 'core id' core id : 0 core id : 2 core id : 1 core id : 3 Multiple processors Rare, but in case you are on a system that has multiple physical processors (yes, it means 2 or more processors fitted on the motherboard), then the results of /proc/cpuinfo would be different5VT6102 [Rhine-II] (rev 74) 01:00.0 VGA compatible controller: VIA Technologies, Inc
Please ask the forum!If you feel this was helpful please click the KUDOS! thumb below! 1 Kudo Reply If the number of cores is equal to the number of processing units as seen by the OS, then NO hyper threadingNon-prefetchable 32 bit memory at 0xde000000 [0xde0007ff]The system model is returned by modelDennis Handly Acclaimed Contributor Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print Email to a Friend Report Inappropriate Content 06-29-2012 11:31 PM 06-29-2012 11:31 PM Re: how to find the CPU cores in HP-UX 11.31 >please help me full hardware listing:System Overview––––––––––––––––––––––––––––––- NOTE: You should retain this information for future referenceInstalled sun's new asset tracking doohick - no clue how it works though :/ This may be a very good idea for you too, if you have a number of machines to keep track of
Caolhedw replied
441 weeks ago